TDS full form water

TDS is used to denote the total concentration of dissolved substances in drinking water. TDS full form is Total Dissolved Solids.

What is the full form of TDS?

The full form of TDS is Total Dissolved Solids.
TDS stands for Total Dissolved Solids.
TDS is an abbreviation for Total Dissolved Solids.
TDS ka full form - Total Dissolved Solids.

What is TDS in water?

Water can be classified based on the level of total dissolved solids (TDS) in the water, such as freshwater, brackish water, brackish water and hypersaline.

TDS contains inorganic salts as well as small amounts of organic matter. TDS concentrations are often measured in parts per million (ppm). TDS level tells us whether drinking water is suitable for consumption, requires filtration, or is highly contaminated. The amount of TDS in water can be easily measured using a digital meter.

Total dissolved solids include both volatile and non-volatile solids. Volatile solids are those which can easily change from solid to liquid state. To achieve this change of state, the non-volatile solid must be heated to a high temperature, typically 550 °C. Examples of non-volatile substances include salts and sugars.

Generally, a TDS level between 50-150 is considered most appropriate and acceptable. If the TDS level is around 1000 ppm, it is unsafe and unfit for human consumption.

Why is TDS important in water?

TDS (Total Dissolved Solids) is an important parameter in water quality analysis. Here are some reasons why TDS is important in water:

1. Drinking Water Safety: TDS serves as an indicator of the overall quality and safety of drinking water. High TDS levels can indicate the presence of contaminants such as salts, minerals, heavy metals, nitrates, or pollutants that may affect the water's suitability for consumption. Excessive TDS can have health implications, so monitoring TDS helps ensure the safety of drinking water.
2. Taste and Odor: TDS can impact the taste and odor of water. Water with high TDS levels may taste or smell unpleasant due to the dissolved minerals, salts, or organic matter. Monitoring TDS helps assess water quality and identify potential issues related to taste and odor that may affect consumer acceptance and satisfaction.
3. Corrosion and Scaling: Elevated TDS levels can contribute to corrosion and scaling in plumbing systems and appliances. The dissolved minerals in water, such as calcium and magnesium, can precipitate and form deposits on surfaces, leading to scaling or blockages in pipes, reduced water flow, and damage to plumbing infrastructure. Monitoring TDS aids in managing corrosion and scaling issues.
4. Irrigation and Agriculture: TDS levels are crucial for agricultural practices and irrigation. The quality of water used for irrigation can impact soil health, nutrient availability, and plant growth. High TDS concentrations can affect soil structure, reduce water permeability, and potentially harm crop yield and productivity. Monitoring TDS helps in selecting appropriate irrigation water sources and managing the impact on agricultural practices.
5. Water Treatment Processes: TDS is a key consideration in water treatment processes. High TDS levels may require additional treatment steps to remove or reduce dissolved contaminants. Understanding TDS helps in designing and optimizing treatment processes to achieve the desired water quality objectives.
6. Environmental Impact: TDS levels can have environmental implications when water is discharged into natural bodies of water. Elevated TDS concentrations can affect aquatic ecosystems, alter water chemistry, and impact the health and survival of aquatic organisms. Monitoring TDS helps in assessing and managing the environmental impact of water discharge.

By measuring and monitoring TDS, water quality professionals, regulators, and users can evaluate the suitability of water for various applications, take appropriate actions to mitigate potential issues, and ensure the safety and integrity of water resources.

Why is your water TDS is so high?

Here are some common causes for high TDS in water:

1. Geographical Location: The geological composition of the area where your water source is located can contribute to high TDS levels. Certain regions may have naturally occurring minerals, salts, or dissolved solids in the groundwater, resulting in elevated TDS.
2. Underground Contamination: If your water source is located near industrial areas, mining sites, or agricultural activities, it is possible for contaminants to seep into the groundwater, leading to higher TDS levels. Industrial waste, fertilizers, and pesticides are examples of potential contaminants that can increase TDS.
3. Dissolved Minerals: The presence of minerals like calcium, magnesium, sodium, and potassium can significantly contribute to TDS in water. These minerals can dissolve in water sources and increase the overall TDS levels.
4. Saltwater Intrusion: If you live in coastal areas, there may be a possibility of saltwater intrusion into the groundwater due to over-pumping or other factors. Saltwater contains high levels of dissolved salts, which can elevate the TDS levels in the water supply.
5. Water Treatment Processes: In some cases, the TDS levels in water can be influenced by the treatment processes used by the local water utility. For instance, water softening or desalination methods can alter TDS levels.

To determine the specific reason for high TDS in your water, it is recommended to contact your local water utility or conduct water testing through a certified laboratory. They can provide you with accurate information about the sources and causes of high TDS levels in your specific area and offer appropriate solutions to address the issue, if necessary.

Types of TDS (total dissolved solids)

Total Dissolved Solids (TDS) refer to the combined content of inorganic salts, minerals, metals, and other substances that are dissolved in water. TDS can encompass various types of dissolved solids. Here are some common types of TDS in water:

1. Minerals: TDS often includes dissolved minerals such as calcium, magnesium, sodium, potassium, iron, manganese, and carbonate. These minerals are naturally occurring and can be found in varying concentrations depending on the water source.
2. Salts: TDS includes salts like chloride, sulfate, nitrate, and bicarbonate. These salts can originate from natural sources, such as rock formations, or can be a result of human activities, including agriculture, industrial processes, or road de-icing.
3. Heavy Metals: TDS can contain dissolved heavy metals, including lead, arsenic, mercury, cadmium, and chromium. These metals can enter water sources through natural geological processes, industrial discharges, or other human activities.
4. Organic Compounds: TDS may include organic compounds such as humic acids, tannins, pesticides, herbicides, and industrial chemicals. These compounds can come from agricultural runoff, industrial waste, or other sources of pollution.
5. Dissolved Gases: Some gases, such as carbon dioxide (CO2) and methane (CH4), can dissolve in water and contribute to TDS. These gases can be present naturally or as a result of human activities.
6. Microorganisms: While not a significant component of TDS, certain microorganisms, such as bacteria and algae, can be present in water and contribute to the overall dissolved solids content.

It's important to note that the composition of TDS can vary depending on the specific water source, geographical location, and human activities in the area. The presence and concentrations of different types of dissolved solids in water can impact its taste, odor, and overall quality. Water quality testing and analysis can help identify the specific types and concentrations of TDS present in a particular water source.

Sources of Total Dissolved Solids (TDS)

TDS in water can originate from various sources. Here are some common sources of TDS:

1. Natural Geological Processes: TDS can arise from natural geological processes as water comes into contact with rock formations and soil. Water flowing through mineral-rich geological formations can dissolve minerals and salts, contributing to TDS. The composition of TDS can vary based on the geological characteristics of the area, such as the presence of limestone, gypsum, or other mineral deposits.
2. Agricultural Runoff: Fertilizers, pesticides, and herbicides used in agricultural practices can leach into the soil and contaminate water sources through runoff. These chemicals can contribute to TDS when they dissolve in water and are carried into rivers, lakes, or groundwater.
3. Industrial Discharges: Industrial activities can introduce dissolved solids into water sources. Effluents from factories or manufacturing processes may contain minerals, salts, heavy metals, organic compounds, or other substances that contribute to TDS. Improper disposal or inadequate treatment of industrial wastewater can exacerbate TDS levels in receiving water bodies.
4. Domestic Wastewater: Wastewater from households, including sewage and graywater, can contain dissolved solids. While domestic wastewater is typically treated before discharge, inadequate treatment or improper septic system management can result in higher TDS levels.
5. Saltwater Intrusion: In coastal areas, excessive withdrawal of groundwater or natural geological conditions can lead to the intrusion of saltwater into freshwater aquifers. Saltwater contains dissolved salts, and the mixing of saltwater with freshwater sources can increase TDS levels.
6. Human Activities: Various human activities can introduce dissolved solids into water sources. These may include mining operations, construction activities, land development, and improper waste disposal. These activities can contribute to TDS through the release of minerals, salts, chemicals, and other substances.

Understanding the sources of TDS is crucial for managing water quality and implementing appropriate treatment and mitigation measures. Regular water testing and monitoring can help identify the specific sources and concentrations of TDS in a particular water source, facilitating effective management strategies.

Why should you measure total dissolved solids?

Measuring Total Dissolved Solids (TDS) in water is important for several reasons:

1. Water Quality Assessment: TDS measurement serves as an essential parameter for evaluating water quality. It provides information about the overall level of dissolved solids in water, which can impact its suitability for various uses, such as drinking, irrigation, industrial processes, or aquatic ecosystems.
2. Drinking Water Safety: TDS analysis is crucial for assessing the safety of drinking water. Elevated TDS levels can indicate the presence of contaminants, such as salts, minerals, heavy metals, or pollutants, which may pose health risks when consumed in excessive amounts. Monitoring TDS helps ensure the safety and potability of drinking water.
3. Taste and Odor Assessment: TDS measurement helps assess the taste and odor characteristics of water. High TDS levels can contribute to an undesirable taste, such as a salty, bitter, or metallic flavor. Monitoring TDS aids in identifying potential taste and odor issues that may impact consumer acceptance and satisfaction.
4. Water Treatment Optimization: TDS analysis plays a crucial role in water treatment processes. Understanding the TDS levels helps in designing, selecting, and optimizing treatment methods to achieve desired water quality objectives. Treatment processes like desalination, reverse osmosis, or ion exchange can be tailored based on TDS measurements to effectively remove dissolved solids.
5. Corrosion and Scaling Management: Elevated TDS levels in water can lead to corrosion and scaling issues in plumbing systems, appliances, and industrial equipment. Monitoring TDS helps in managing corrosion and scaling problems by identifying potential risks and implementing appropriate mitigation strategies.
6. Environmental Impact Assessment: TDS measurement is essential for assessing the impact of water discharge on the environment. Elevated TDS concentrations can adversely affect aquatic ecosystems, alter water chemistry, and impact the health and survival of aquatic organisms. Monitoring TDS aids in evaluating the potential environmental consequences of water discharge into natural bodies of water.
7. Compliance with Regulations: TDS analysis is often required to meet regulatory standards and guidelines for various water uses. Regulatory authorities may have specific TDS limits or guidelines that must be adhered to for drinking water, industrial processes, agriculture, or environmental protection. Regular TDS monitoring helps ensure compliance with these regulations.

By measuring TDS, water quality professionals, regulators, and users can evaluate the suitability of water for different applications, identify potential issues, and take appropriate actions to ensure the safety, efficiency, and sustainability of water resources.

How is TDS measured?

Total Dissolved Solids (TDS) in water can be measured using various methods. Here are the common techniques employed to measure TDS:

1. Conductivity Measurement: Conductivity is a widely used indirect method to estimate TDS. It measures the ability of water to conduct an electric current, which is directly related to the concentration of dissolved solids. A conductivity meter is used to measure the electrical conductivity, and the value is then converted to TDS using a calibration factor specific to the water sample.
2. Gravimetric Analysis: Gravimetric analysis involves evaporating a known volume of water sample and measuring the weight of the residue left behind. The sample is heated to dryness, and the remaining solids are weighed. The weight of the residue represents the TDS content in the water.
3. Filtration and Drying: In this method, a known volume of water sample is passed through a filter with a specified pore size to separate the suspended solids. The filtrate is then evaporated to dryness, and the residue is weighed to determine the TDS content.
4. Optical Methods: Optical methods, such as turbidity measurement, can indirectly estimate TDS. Turbidity refers to the cloudiness or opacity of water caused by suspended particles. Although turbidity does not directly measure TDS, high turbidity levels can indicate the presence of suspended solids, which contribute to the overall TDS.

It's important to note that TDS measurements provide an overall estimate of the dissolved solids content in water but do not specify the individual components. For a detailed analysis of the specific types and concentrations of dissolved solids, additional testing methods like ion chromatography or spectrometry may be required.

To obtain accurate and reliable TDS measurements, it is advisable to follow recognized protocols and use calibrated instruments. Testing should be conducted by trained professionals or in certified laboratories to ensure accurate results.

How to reduce TDS in water?

Reducing Total Dissolved Solids (TDS) in water can be challenging, as it depends on the specific composition and sources of TDS in your water supply. However, here are some general approaches that may help lower TDS levels:

1. Reverse Osmosis (RO) Filtration: Reverse osmosis is an effective method for reducing TDS in water. RO systems use a semipermeable membrane to remove dissolved solids, contaminants, and impurities from water. The membrane allows water molecules to pass through while blocking the dissolved solids, resulting in purified water with reduced TDS levels.
2. Distillation: Distillation involves heating water to create steam, which is then condensed back into liquid form, leaving behind dissolved solids. Distillation can effectively remove TDS, as the process separates water from impurities based on their different boiling points. However, it can be energy-intensive and may not be suitable for large-scale applications.
3. Ion Exchange: Ion exchange involves replacing dissolved ions in water with other ions of similar charge. This process can reduce TDS by exchanging ions like calcium, magnesium, or sodium with other ions, typically using a resin or zeolite bed. However, ion exchange may not be effective for removing all types of dissolved solids, and the resin or zeolite bed may require periodic regeneration.
4. Electrodialysis: Electrodialysis is a process that uses an electric field to remove ions from water. It involves passing water through ion-selective membranes, which allow certain ions to pass through while blocking others. Electrodialysis can effectively reduce TDS levels, particularly for waters with high ionic content.
5. Blending with Freshwater: Depending on the specific applications and requirements, blending high TDS water with fresh or low TDS water sources can help lower the overall TDS level. This dilution approach can be practical for certain uses like irrigation or industrial processes, where a precise TDS range is necessary.
6. Source Water Management: Depending on the sources of TDS in your water supply, managing and treating the water sources can help reduce TDS. For example, addressing agricultural runoff, improving industrial wastewater treatment, or implementing proper land use practices can minimize the introduction of dissolved solids into the water supply.

It's important to note that the best approach to reduce TDS in water depends on the specific circumstances and water quality requirements. It is recommended to consult with water treatment professionals, conduct water testing, and assess the feasibility and effectiveness of different treatment methods before implementing any specific TDS reduction strategy.

Which TDS is best for drinking water?

The ideal TDS (Total Dissolved Solids) level for drinking water is a matter of debate and can vary based on personal preferences, regional standards, and water sources. However, the following guidelines are often considered:

1. WHO Guidelines: The World Health Organization (WHO) suggests that the TDS of drinking water should ideally be below 600 mg/L (milligrams per liter). They state that water with TDS levels below 300 mg/L is considered excellent, while water with TDS levels above 1,200 mg/L may be unacceptable.
2. EPA Guidelines: The United States Environmental Protection Agency (EPA) does not establish a specific TDS limit for drinking water but recommends that TDS levels below 500 mg/L are generally acceptable for consumption. However, they also emphasize that TDS is not a direct measure of health risk and should be considered in conjunction with other water quality parameters.
3. Taste Preference: The taste of water can be influenced by TDS levels. Some individuals prefer water with lower TDS, finding it to be cleaner or more refreshing, while others may prefer water with slightly higher TDS, perceiving it to have a fuller taste or mineral content. Taste preferences vary among individuals.
4. Local Standards: Some regions or countries may have specific regulations or guidelines for TDS in drinking water. It is advisable to consult local health authorities or water regulatory bodies for any applicable standards or recommendations.

While TDS can provide an indication of water quality, it is essential to consider other factors such as the presence of specific contaminants, microbial safety, and adherence to local water quality standards. It is recommended to conduct comprehensive water testing to assess the overall suitability and safety of drinking water.

Ultimately, the "best" TDS for drinking water can be subjective, and individual preferences and health considerations may play a role in determining the most suitable TDS level.

Is low TDS water is harmful?

Drinking water with low Total Dissolved Solids (TDS) is not inherently harmful to health. In fact, many people prefer water with lower TDS levels due to its perceived cleanliness and refreshing taste. However, it's important to note that extremely low TDS levels can indicate a lack of essential minerals that are beneficial for the body. Here are some key considerations regarding low TDS water:

1. Mineral Content: TDS includes dissolved minerals in water, such as calcium, magnesium, potassium, and sodium, which are essential for the body's proper functioning. Water with very low TDS levels may have significantly reduced mineral content. While minerals can be obtained from food sources, water can contribute to the overall mineral intake, especially in regions where the local diet may be lacking in certain minerals.
2. Mineral Deficiencies: Drinking water with very low TDS levels alone is unlikely to cause mineral deficiencies, as minerals are primarily obtained from a balanced diet. However, in situations where water is the primary source of hydration and the diet lacks mineral-rich foods, long-term consumption of low TDS water may contribute to mineral imbalances or deficiencies. It is important to ensure a well-rounded and nutritious diet to obtain essential minerals.
3. Personal Health Considerations: Individuals with specific health conditions or dietary restrictions may need to pay closer attention to their mineral intake. For example, people with certain medical conditions or those on restricted diets may require higher mineral intake. In such cases, low TDS water may not be the most suitable choice, and the guidance of a healthcare professional or dietitian should be sought.
4. Water Quality and Safety: While low TDS water may be safe to drink from a microbiological standpoint, it is crucial to ensure that the water meets other quality parameters and is free from contaminants or microbial pathogens. Proper water treatment, regular testing, and adherence to local water quality standards are essential to ensure the safety of low TDS water.

Overall, consuming low TDS water is generally safe for most individuals as long as they maintain a balanced diet and ensure adequate mineral intake through food sources. However, individuals with specific health considerations should consult healthcare professionals for personalized advice.

Is high TDS in water harmful?

High Total Dissolved Solids (TDS) in water are not necessarily harmful to health, but they can have certain implications and considerations. Here are some key points regarding high TDS in water:

1. Taste and Palatability: Water with high TDS levels may have an undesirable taste, often described as salty, bitter, or metallic. This can affect the palatability of the water, making it less appealing for drinking.
2. Mineral Content: High TDS in water can indicate elevated levels of minerals such as calcium, magnesium, sodium, or potassium. While these minerals are essential for the body, excessive intake through water consumption alone may not be ideal, as mineral requirements are typically met through a balanced diet. It's important to consider overall mineral intake from various sources to avoid potential imbalances.
3. Potential for Contaminants: High TDS levels can also be an indication of the presence of other dissolved substances in water, including contaminants or pollutants. This could include substances such as heavy metals, nitrates, sulfates, or other industrial or agricultural pollutants. The specific nature and concentration of these substances would need to be determined through water testing to assess any potential health risks.
4. Impact on Certain Medical Conditions: Individuals with specific health conditions, such as kidney disease or hypertension, may need to monitor their water intake, including TDS levels. In some cases, high TDS water may need to be avoided or consumed in moderation as advised by healthcare professionals.
5. Corrosion and Scaling: High TDS levels in water can contribute to corrosion of plumbing systems and scaling on fixtures, appliances, and equipment that come into contact with water. This can impact the lifespan and efficiency of the infrastructure and require additional maintenance.

It's important to note that the specific composition of TDS and the presence of contaminants or pollutants are more critical factors to consider when assessing the potential health risks associated with high TDS water. Water quality testing, adherence to local water quality standards, and consultation with water treatment professionals or healthcare providers can help evaluate and address any concerns related to high TDS levels.

In summary, high TDS in water does not necessarily pose direct health risks, but it may affect taste, indicate the presence of certain minerals or contaminants, and have implications for specific health conditions or infrastructure. Individual circumstances, overall water quality, and consultation with relevant experts are important in determining the suitability and safety of high TDS water.

---

Books that everyone should read

---

1

Trading Mastermind Book - Become a Trading Expert From Scratch

Book Description

This is one of the best trading books to help you trade the stock market. This Trading Mastermind book helps you become a professional trader. Professional traders test them by creating trading strategies that tell them what to buy, when to buy and when to sell. This book teaches you how to create trading strategies for beginners and how to trade stocks for beginners.

About 84% of individual traders do not have their own strategy for trading the stock market. This book helps you learn, practice and create your own trading strategies, test them and become an active market trader. This book helps you to learn different types of trading strategies like - Day Trading Strategies, Options Trading Strategies, Trading Strategies, etc.

This book is for those who want to delve into the psychology of trading and build profitable trading strategies and systems. The book covers getting started with technical analysis, reading candlesticks and patterns, understanding moving averages, indicators and oscillators that give us buy/sell signals. All this together helps you to make a complete strategy.

The book explains to you the complete strategy building process such as - idea, documentation, backtesting, paper trade, use in real markets. At the end of this you will be able to trade independently. This book teaches you how to use successful traders strategies.

Book details

Language: English
Format: Hardcover
Rating: 4.1 out of 5
Author: Zebra Learn
Print Length: 335 pages
Publication Date: 1 January 2022
Publisher: ZebraLearn Pvt Ltd
Paperback Price: Rs. 1,490.00*
*Price and stock are correct and available at the time of article publication.

Get it here from Amazon

---

2

Family Law: A Husband's Guide to Matrimonial Disputes

Book Description

The book contents topics are - Domestic Violence, Divorce, Maintenance to Wife, Multiple Maintenance, Child Custody, Quashing 498A, Perjury, Transfer Petition, Miscellaneous Judgements, Acts.

Special laws have been enacted to protect women from physical, emotional or sexual violence or economic abuse. There is a growing awareness of violence against women around the world.

However, there are no specific laws to protect the dignity of a person. Apart from falsely accusing men of dowry, they are also being made victims of cruelty and domestic violence.

Special laws are misused and have become a source of legal terrorism in which innocent people are imprisoned and victimized through no fault of their own. In many unfortunate cases, some men are tortured to such an extent that they break down and commit suicide.

The purpose of this book is to strengthen such laws and court decisions where men have been able to regain their dignity and the ability to defend themselves, including the repeal of 498A and the resolution of multiple maintenance claims under various laws.

There are numerous types of lawyers in India for dealing the different cases related to criminal law, corporate law, family law, etc. The type of laywers in India are - Intellectual Property Lawyer, Public Interest Lawyer, Tax Lawyer, Corporate Lawyers, Immigration Lawyers, Criminal Lawyer, Civil Rights Lawyer, Family Lawyer, etc. After reading this book, you will be able to know how to select a specific family and criminal lawyer.

Book details

Language: English
Format: Paperback
Rating: 4 out of 5
Author: Navin Kr Agarwal & Manoj Agrawal
Print Length: 336 pages
Publication Date: 1 January 2018
Publisher: Notion Press
Paperback Price: Rs. 374.00*
*Price and stock are correct and available at the time of article publication.

Get it here from Amazon

---

3

How To Use Google Voice With Google Docs

Book Description

Using Google Docs for the first time can be a bit overwhelming, but once you get used to the features of this book, it will become easier.

Google Docs Voice Typing lets you complete your project using your voice. This book helps to learn "Sadsafdasaf". Especially if typing is difficult with your hand or you don't want to type while writing a book novel.

Following are the highlights of what this book offers -

• How Does Google Docs Work?
• Step-By-Step Directions For Creating An Account
• Instructions For Making A Blank Document
• Importing A Document From Microsoft Word And How To Do It
• Instructions On How To Set Up On Your Computer, Google Voice, Or Smartphone
• Install Google Voice On An iPhone
• Getting Started With Google Docs Voice Typing for Android
• Instructions For Installing Google Docs Voice Typing Into Your Personal Computer
• Linking Multiple Phone Numbers To A Single Account On Your Computer's Google Voice App
• How To Dictate Your Writing With Your Voice Using The Voice Dictation Feature In Google Docs
• How To Make Changes To Text Dictated By Voice In Google Docs
• How to Proceed if Google Docs Disallows Voice Typing
• Why Isn't Google Docs Recognizing My Voice As An Input Option?
• Solutions To Problems With The Voice Input On Google Docs

Book details

Language: English
Format: Kindle Edition
Author: Walker U. Pugh
Print Length: 38 pages
Publication Date: 18 August 2022
Kindle Price: Rs. *
*Price and stock are correct and available at the time of article publication.

Get it here from Amazon

---

4

Mortgage Terms - Financial Education Is Your Best Investment

Book Description

Everyone should know the basic terms of a mortgage. One of the most important decisions you can make is to buy a home and mortgage it to pay off the house. The decisions you make about your mortgage will have financial implications for years to come.

If you find yourself overwhelmed and confused by all the terms and conditions of a mortgage, don't worry because you are not alone. Getting a mortgage can be a complicated process that is made worse by unfamiliar terminology used by your mortgage lender.

The terminology used in mortgage discussions such as appraisal, equity, escrow, points and settlement cost easily confuses most people. Because mortgage professionals often confuse people by speaking their language.

This handy guide to mortgages covers many confusing topics that are easy to explain, such as -

• Mortgage loans and brokers, types of Mortgage
• Subprime, reverse and FHA mortgages, Mortgate Bonds
• Business and residential mortgages
• Custody, points and settlement costs
• Home Equity and Loan Modification, House Mortgate

This handy glossary lists more than 125 of the most important mortgage terms you'll encounter in alphabetical order. Each mortgage term in the book is explained in detail with clear and concise article style descriptions and practical examples.

This will help you understand the most common mortgage terms you may encounter and what role they play in the mortgage process. Use this glossary of mortgage terms to better understand the overall mortgage process, as well as any specific mortgage terms you may be unfamiliar with.

Book details

Language: English
Format: Paperback
Rating: 4 out of 5
Author: Thomas Herold
Print Length: 266 pages
Publication Date: 2 March 2020
Publisher: Indy Pub
Paperback Price: Rs. 1,020.00*
*Price and stock are correct and available at the time of article publication.

Get it here from Amazon

---

5

Learn Google Cloud Platform(GCP) from the Scratch: The Ultimate Guide for Beginners

Book Description

As you can see, Google Cloud is growing rapidly these days as companies increasingly adopt multi-cloud strategies. In 2019, it was again named a Leader in Gartner's Infrastructure Magic Quadrant for Services, and people with Google Cloud skills are in high demand.

To meet this demand and help organizations identify talented professionals, Google created its Associate Cloud Engineer certification.

This book is designed to provide students with a solid foundation of GCP competency that they will later need to obtain the Google Certified Professional Cloud Architect (PCA) certification, which was recently recognized as the highest-paying IT certification of 2019. It has been labeled as.

This book prepares you for the following tasks -

• Set up and configure Google Cloud accounts using best practices.
• Using GCP services like cloud storage, Compute Engine, and Kubernetes Engine in your daily work.
• Passing the GCP Associate Cloud Engineer certification exam.

This book is suitable for system administrators or anyone else who wants to learn how to configure and manage Google Cloud systems and demonstrate these skills through certification. This book can also be used by developers who want to use Google Cloud for their applications.

Book details

Language: English
Format: Kindle Edition
Rating: 3.8 out of 5
Author: Adney Ainsley
Print Length: 96 pages
Publication Date: 24 August 2020
Kindle Price: Rs. 293.00*
*Price and stock are correct and available at the time of article publication.

Get it here from Amazon

---

Tags : Full Forms

By Aashutosh Kumar Yadav

He is a PHP-based UI/Web designer and developer by profession and very interested in technical writing and blogging. He has been writing technical content for about 10 years and has proficient in practical knowledge and technical writing.
@www.infotokri.in